Week 4
A+B = 1ml/L
Rootstim = 1ml/L
Fulvic = 1ml/L
Silicon = 0.4ml/L
E.C = 1.4
P.H = 5.9
Here are the
Barneys Blue Cheese at the start of there 4th week, they are coming on nicely now and are just about to take off it seems.
This is the
Dinafem Deep Cheese and
Critical+, As you can see they’ve still done nothing.
Deep Cheese has definitely grown but never known anything grow so slowly.
Just after my last update I learnt I’m doing it all wrong and stop treating coco like soil. Don’t let it dry out,
Since then they have been fertigated every day by hand just before the lights come on, and also been upping the feed a bit now.
To start with was putting in 1L per pot and getting 3L total runoff from 4 plants so gradually been lowering the volume of feed going in each day trying to reach the magic 20-30% runoff. 700ml per pot gives me 2L of total runoff from 5 pots so by my calculations I’m getting 60% runoff at the moment. Should theoretically be able to drop it to 350ml per pot and that should give me my 30%, gonna try 500ml next though and see how that goes. First off I need to measure the runoff tonight and see what the ec is, I measured the barrel and that's giving a reading of over 3.5 ec and ph of 7+ but that's not very accurate, by the time its reached the barrel too much could have happened. ive made a better way of taking runoff so I can measure it straight from the pot, just need to try it tonight and see what result I get back to decide what happens next. if the runoff is acceptable ill keep going as I am, if ec is too high then i'll put plenty of juice in for the next couple of days and get it all back under control.
I’m tempted to automate this with drip rings and things but don’t really have room for a reservoir. I’d like to be fertigating 3-4 times a day during flower but will be unable to do that by hand.
At the moment I’m using 25L barrels with markers drawn every 2L and they are working well for me, they are tough and see through so good for measuring out different amounts of solution.
Trouble I’m finding is I can’t seem to find a pump small enough to fit through the hole in the barrel, some sort of inline pump might be my only option at this point, like the 12v water pumps you find in a caravan or something similar.
The other thing is what to put on the end of the lines, I like the look of those hydro halo’s but will cost about £40 for 4 of those and not willing to pay that when you could make something similar for less than a tenner, I’m thinking hard pvc tube heated up and bent into a c shape and capped off at each end with a load of small holes drilled in should do it, small hose barb fitted to it for attaching hose jobs a good en.
I’ve got a load of spray heads from an outdoor irrigation system but not sure if I’d trust them long term, they seem like they would be prone to clogging, also with the lower pressure I just don’t think they will work very well.
Decisions decisions, Hopefully after tonight ill know a bit more where this is going
peace