First time in coco…
- MrNice
- Registered User
- Posts: 10709
- Joined: Fri Apr 24, 2020 7:25 pm
- Has thanked: 7479 times
- Been thanked: 9552 times
- Status: Offline
Re: First time in coco…
Sticky wats ya groom a filing cabinet ?
- These users thanked the author MrNice for the post (total 2):
- Stickylemonz (Tue Nov 09, 2021 6:35 pm) • duke (Tue Nov 09, 2021 6:51 pm)
- 2-Scoops
- Registered User
- Posts: 6245
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 9588 times
- Been thanked: 9404 times
- Status: Offline
Re: First time in coco…
Your prolly feeding too much especially with the young smallest plants. You should prolly be following my feed advice from my last post tbh. Well I'll quote it again below.

2-Scoops wrote: ↑Fri Nov 05, 2021 11:39 amYou wont fuck them up on 1ml a liter feeding every 2 days, they screaming for ferts mate, you could go 1ml with all 3 but its your shout i can understand cautious approach, but really they are hungry. The small ones that have just shown their heads if you don`t want those going all pale and hungry then you could also give those 1/2ml a liter and then let them be 3 to 4 days between feeds.
Yes cool if your dimming light maybe try by half cus plants are starting to look rough and tis prolly light or heat related, basically it wont hurt too much to lower intensity of light and its better than frying plants. I'd leave light or set it as high as it will go in their though. Not sure about numbers but plants are saying they`re a bit rough from here.Stickylemonz wrote: ↑Mon Nov 08, 2021 12:11 pmHave moved light down and dimmed light as been told could be light stress why they curling.
- These users thanked the author 2-Scoops for the post (total 2):
- Stickylemonz (Tue Nov 09, 2021 6:31 pm) • duke (Tue Nov 09, 2021 6:51 pm)
"But your still looking at me that same damn way............ Like i just shit in your scrambled eggs" > Negan, Walking Dead
- Stickylemonz
- Registered User
- Posts: 1574
- Joined: Sun Jan 31, 2021 6:13 pm
- Location: Uk
- Has thanked: 2006 times
- Been thanked: 1552 times
- Status: Offline
Re: First time in coco…
What so 1.5 for bigger two is two much every two days? And what so light is okay or not haha also what you mean set it high as i can. I’m very confused now lol2-Scoops wrote: ↑Tue Nov 09, 2021 3:23 pmYour prolly feeding too much especially with the young smallest plants. You should prolly be following my feed advice from my last post tbh. Well I'll quote it again below.
2-Scoops wrote: ↑Fri Nov 05, 2021 11:39 amYou wont fuck them up on 1ml a liter feeding every 2 days, they screaming for ferts mate, you could go 1ml with all 3 but its your shout i can understand cautious approach, but really they are hungry. The small ones that have just shown their heads if you don`t want those going all pale and hungry then you could also give those 1/2ml a liter and then let them be 3 to 4 days between feeds.![]()
Yes cool if your dimming light maybe try by half cus plants are starting to look rough and tis prolly light or heat related, basically it wont hurt too much to lower intensity of light and its better than frying plants. I'd leave light or set it as high as it will go in their though. Not sure about numbers but plants are saying they`re a bit rough from here.Stickylemonz wrote: ↑Mon Nov 08, 2021 12:11 pmHave moved light down and dimmed light as been told could be light stress why they curling.![]()
- These users thanked the author Stickylemonz for the post:
- duke (Tue Nov 09, 2021 6:51 pm)
- Stickylemonz
- Registered User
- Posts: 1574
- Joined: Sun Jan 31, 2021 6:13 pm
- Location: Uk
- Has thanked: 2006 times
- Been thanked: 1552 times
- Status: Offline
Re: First time in coco…
It is to start then off with mate
- These users thanked the author Stickylemonz for the post (total 2):
- duke (Tue Nov 09, 2021 6:50 pm) • MrNice (Tue Nov 09, 2021 9:39 pm)
- Stickylemonz
- Registered User
- Posts: 1574
- Joined: Sun Jan 31, 2021 6:13 pm
- Location: Uk
- Has thanked: 2006 times
- Been thanked: 1552 times
- Status: Offline
- 2-Scoops
- Registered User
- Posts: 6245
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 9588 times
- Been thanked: 9404 times
- Status: Offline
Re: First time in coco…
I would say 1.5ml a ltr maybe too much and may cause problems for larger plants where as 1ml a ltr is more than enough and wont cause problems.Stickylemonz wrote: ↑Tue Nov 09, 2021 6:33 pmWhat so 1.5 for bigger two is two much every two days?
1ml a ltr for smallest is same as well, it maybe be too much but 1/2ml a ltr wont be and is ample enough atmo .
Well its looking like light has recently started to fry plants past few days, prolly from being moved a bit too close to plants and fix for that is to raise lights, i can`t say it any simpler than that.Stickylemonz wrote: ↑Tue Nov 09, 2021 6:33 pmwhat you mean set it high as i can. I’m very confused now lol
- These users thanked the author 2-Scoops for the post:
- Stickylemonz (Wed Nov 10, 2021 1:43 pm)
- Stickylemonz
- Registered User
- Posts: 1574
- Joined: Sun Jan 31, 2021 6:13 pm
- Location: Uk
- Has thanked: 2006 times
- Been thanked: 1552 times
- Status: Offline
Re: First time in coco…
Ahhh okay, yes I read it as 1 to 2ml not 0.5 that why feed is 1.5 haha, I’ll go back to 1ml for everyplant, smaller ones every 4 days bigger every other day. I’ll change the small ones back to 0.5ml/l every 4 days. When you put 1/2 I thought you meant either 1 or 2 not 0.5 haha, yes I think I did dry them.. got told to put light closer and turn right down. Should have left light as they were looking fine so think I’ve just fucked em up again2-Scoops wrote: ↑Wed Nov 10, 2021 11:28 amI would say 1.5ml a ltr maybe too much and may cause problems for larger plants where as 1ml a ltr is more than enough and wont cause problems.Stickylemonz wrote: ↑Tue Nov 09, 2021 6:33 pmWhat so 1.5 for bigger two is two much every two days?
1ml a ltr for smallest is same as well, it maybe be too much but 1/2ml a ltr wont be and is ample enough atmo .
Well its looking like light has recently started to fry plants past few days, prolly from being moved a bit too close to plants and fix for that is to raise lights, i can`t say it any simpler than that.Stickylemonz wrote: ↑Tue Nov 09, 2021 6:33 pmwhat you mean set it high as i can. I’m very confused now lol
- 2-Scoops
- Registered User
- Posts: 6245
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 9588 times
- Been thanked: 9404 times
- Status: Offline
Re: First time in coco…
Nah i shoulda said half ml, my bad. Make sure you give them all a really good drink next time you feed to plenty of run off, it just helps wash out older salts that can build up quickly in your coco medium.Stickylemonz wrote: ↑Wed Nov 10, 2021 1:46 pm. When you put 1/2 I thought you meant either 1 or 2 not 0.5
Ah well shit happens, I'm sure they will still come good. Just remember young plants will fry easily under most lights if too close, I mean I'm not clued on numbers, meters, lux, etc etc but its not hard to tell most the time. Fluorescent light which is an exception and you can get light virtually on top of young plants. But yes they should be fine.
The 2 bigger ones are coming round well enough by the way.
- Stickylemonz
- Registered User
- Posts: 1574
- Joined: Sun Jan 31, 2021 6:13 pm
- Location: Uk
- Has thanked: 2006 times
- Been thanked: 1552 times
- Status: Offline
Re: First time in coco…
Update: I’ve changed to 1ml/l a&b with 0.2 of cal mag to see if helps with them.my ph pen broke so have ordered new one arrived today so will ph it properly from now on. The two big ones get fed every other day. The three smaller ones are on 0.5ml/l And that’s every 4 days. One of bigger ones has almost like rust spots if anyone could help? 



- Ghost_In_A_Jar
- Registered User
- Posts: 595
- Joined: Wed Nov 11, 2020 2:30 pm
- Has thanked: 740 times
- Been thanked: 535 times
- Status: Offline
Re: First time in coco…
Could be ph, or could be a bit of nutrient lock from the high feed last time.
Good thing is that either way, you can flush them with some fresh water and reset.
Might not be either of those things, I’m just guessing. Sure someone will be able to correct me if I’m wrong
Good thing is that either way, you can flush them with some fresh water and reset.
Might not be either of those things, I’m just guessing. Sure someone will be able to correct me if I’m wrong
- These users thanked the author Ghost_In_A_Jar for the post:
- Stickylemonz (Wed Nov 17, 2021 12:41 pm)