Ghost_In _A_Jars's Multi Strain Coco Adventure

[Ghost_In_A_Jar]

The chosen ones.....
2 x LA Cheese
2 x Trainwreck
1 x Frosty Gelato (Literally one shot at beating GMO's crop )
Potted up with 1tsp of Dynomyco each.
Fed today also.
2lt water @ 232ppm, ph'd to 5.62
.5ml Rhizo - No effect on ppm
0.25m/l Canna A - 265ppm
0.25m/l Canna B - 277ppm (waited 5 mins after adding A before mixing in part B)

Fed 400ml each.
Light lowered about 4" and reduced to 80% so as not to batter the JH that are still hanging in there.

[Sage]

looks solid

[Keeno]

The chosen ones.....
2 x LA Cheese
2 x Trainwreck
1 x Frosty Gelato (Literally one shot at beating GMO's crop )
Potted up with 1tsp of Dynomyco each.
Fed today also.
2lt water @ 232ppm, ph'd to 5.62
.5ml Rhizo - No effect on ppm
0.25m/l Canna A - 265ppm
0.25m/l Canna B - 277ppm (waited 5 mins after adding A before mixing in part B)

Fed 400ml each.
Light lowered about 4" and reduced to 80% so as not to batter the JH that are still hanging in there.

All looking good mate.

Kee the feed where it is, can you post a picture every 2 days. We will up the feed and PH in the next 2-5 days. Slowly move through the gears. Be careful not to overwater now you have potted up. Once you have roots at the bottom of the new pot you can feed without worry.

[Ghost_In_A_Jar]

Will do.
I will pot up one more time into the 18l pots. They are in 3lt pots now. Should give me a bit more breathing time during this early stage.
Once I’ve got the JH down, I’ll clean down and pot up again to the final homes. They can then get hooked onto the Wilma and we should be all systems go!

[2-Scoops]

They don`t call it "trainwreck" for nowt its all in the name, best name for a weed plant if ever i heard one. Tis a proper sativa heavy plant if i ever saw one with thinnest blades to leaves I've ever seen on a weed plant and it grows thin vine like stems that will 100% need some kind of support, it can grow into a real big mess can this fucker when you see it after stretch, a bit of training may help. Is it the Arcata Trainwreck would ya know ? Your in good hands Ghost, good luck.

[Ghost_In_A_Jar]

Can’t say a huge amount has happened, but before we disappear off to the big smoke for the weekend….
Gave these a small bit of feed at the same rate as before.
Water at 231ppm
Fed rhizo at .5m/l - 263ppm
Part A at .25m/l - 296ppm
Part B at .25m/l - 314ppm
Given 500ml each so they should be good until I get back on Sunday possibly with a fiancé in tow…. If she says yes

[mostang64]

This looks very interesting

[Keeno]

Get a lights off pic when you are back tomorrow @Ghost_In_A_Jar. I reckon they will have moved a fair bit in the couple days you've been away.

[Ghost_In_A_Jar]

Apologies @Keeno , I didn’t get the lights off pic….
I’ll be over to check again tomorrow, so I’ll update again then.
All the JH have now been moved out. 1 left in the 70x70 to finish off under the Dutch Passion 190w.
Light now moved down to about 12” about the plants. Running at 65% and it’s still banging it out.
Can’t say i am seeing much growth at the moment, but im putting this down to a high light and having reduced air movement due to the JH still being in with them.
So now we have a dedicated tent to get these going. Im not going to fill the res while I don’t need to. I can hand feed for the moment and switch to the Wilma when there is a bit more of a requirement.
Nothing fed today as it’s all still wet.
Lights off pic to follow…..

[Keeno]

Apologies @Keeno , I didn’t get the lights off pic….
I’ll be over to check again tomorrow, so I’ll update again then.
All the JH have now been moved out. 1 left in the 70x70 to finish off under the Dutch Passion 190w.
Light now moved down to about 12” about the plants. Running at 65% and it’s still banging it out.
Can’t say i am seeing much growth at the moment, but im putting this down to a high light and having reduced air movement due to the JH still being in with them.
So now we have a dedicated tent to get these going. Im not going to fill the res while I don’t need to. I can hand feed for the moment and switch to the Wilma when there is a bit more of a requirement.
Nothing fed today as it’s all still wet.
Lights off pic to follow…..

Looking good mate. Keep an eye on the LED being that close, you did the right thing as they are stretching a tad. Have you got a fan blowing on them? A good way to get them stems strong and thicker from the start.