Encrypted Garden Run #001

[ncrypta.core]

Remember they will be starting to taper off feeding and taking up less ferts in a week or two, so build up will occur pretty quick running those EC`s in a few more weeks. Summink to bare in mind mate.

This is one thing I hate about auto, when do you back off. So treating this like the photo as in I'm in week 3 of flower day 16 so I can push them till the end of week 4 then start to back off, thinking as got the uva for @Invisible Sun could do a high feeding because say it improve uptake of nutrients, hots seems to be loving the higher ec as not tip burn nothing, trizzler a little, but next feed going give her a manual top-up of 2-5l of pure water phed just so can get to 30%+ run off as she is going to her bulking stage. but deciding if to see what happens at 2.7-3.0 EC, this be the highest ill run them.

Can't wait to go back to coco as of the run-off.

[ncrypta.core]

Nice looking plants mate there starting to frost up nicely I have seen that light before amd think it's a cool looking light how does it do for you ? Is that a 3x3 tent ?

Thanks, man, This light was the first ever one I wanted but instead bought the spider farmer sf1000. I adore this light would highly recommend it it's the 300w version btw. The node spacing is cost together don't need a heater as if you run on 60-80 it's 80-83F 100% gets up to 86F

This is my second light as the other broke as my tent went over their humidity threshold. not my fault lol.

I'm in a 2.5x2.5/ 75cm x 75cm,
https://www.onestopgrowshop.co.uk/budbo ... -tent.html

I go have a GQ100, but not in use atm

even tho the light says it's for a 1m x 1m, perform brilliantly, at 100% 12inchs is roughly 966 avg ppfd so can't run it close to needing co2. I followed micro lux to pfd guide and bought the closest lux meter to the apperge 500. The Uni-T UT383

[2-Scoops]

Remember they will be starting to taper off feeding and taking up less ferts in a week or two, so build up will occur pretty quick running those EC`s in a few more weeks. Summink to bare in mind mate.

This is one thing I hate about auto, when do you back off. So treating this like the photo as in I'm in week 3 of flower day 16 so I can push them till the end of week 4 then start to back off, thinking as got the uva for @Invisible Sun could do a high feeding because say it improve uptake of nutrients, hots seems to be loving the higher ec as not tip burn nothing, trizzler a little, but next feed going give her a manual top-up of 2-5l of pure water phed just so can get to 30%+ run off as she is going to her bulking stage. but deciding if to see what happens at 2.7-3.0 EC, this be the highest ill run them.

Can't wait to go back to coco as of the run-off.

I did used to grow in coco for 7 or 8 years when i first got into coco growing, running a standalone fert EC of 2.8 right from flip to final flush in 5 gallon pots, but pots needed flushing through on a weekly basis, if i left it for 2 weeks run-off was hitting close to 5.0ec to no detrimental effects on plant. Point being it was more a waste of money pissing ferts down drain that are never gonna get used, i now run with a straight fert ec 1.4 for 3 to 4 weeks from flip before dropping back to 1.2 to same result, but a lot less £ down drain. I still get build up running as i do now and by time i put them on water for few weeks towards end guaranteed run off will be climbing to 2.0 +/- ec give or take.

[ncrypta.core]

I did used to grow in coco for 7 or 8 years when i first got into coco growing, running a standalone fert EC of 2.8 right from flip to final flush in 5 gallon pots, but pots needed flushing through on a weekly basis, if i left it for 2 weeks run-off was hitting close to 5.0ec to no detrimental effects on plant. Point being it was more a waste of money pissing ferts down drain that are never gonna get used, i now run with a straight fert ec 1.4 for 3 to 4 weeks from flip before dropping back to 1.2 to same result, but a lot less £ down drain. I still get build up running as i do now and by time i put them on water for few weeks towards end guaranteed run off will be climbing to 2.0 +/- ec give or take.

I know it's prob a waste, just wondered why some people run it at 3 some stack it till 7-8 I think I've seen. So thought I'd try it once. As in soil was told feed light max 1.7, but me being me thought what if go higher just to see what happens. for me, I learn quicker this way. In my other diary, I'm d not feeding so high like use up to 1.8 or something. Have tried lower ec before but never produced as much as when I feed purple punch 2.5 max. Then after the other grow as also in soil, I can decide which I prefer, then hopefully come up with a custom feed guide for myself :)

[ncrypta.core]

### AD--43-49###
Lights:

* ATS 300W (06:30 - 23:20)
* Height: 12in/30cm
* Dimmer (100%)
* Avg PPDF: 966
* DLI: 58

-----------------------

AD-44: July 7th 2021.
Noticed a few bud site hairs on Hotz are orange, not sure if this is to do with the intense light or one of it stage as it bulks up. Trizzler feeds a lot going now feed her about 6L 3l of this will be plain water to find her run-off spot.

Air Control

* 81.5-86F (AVG-84F) (Lights On)
* 68F (Lights Off)
* 52%-58% (57% AVG) RH%
* VPD: 1.07 kPa

Going to try to drop the humidity next week to around 48-50 as then in the ideal vpd range for mid/late flower but atm I think I have the conditions spot one as the temps get to 86/87F-29/30C and they seem to like it. As all I do is change humidity to match as I go by the vpd chart and my leaf temps are 3c cooler.

[Keeno]

They certainly look to be liking the extra attention to detail. Thank you for such informative updates, I'm sure it will many over the years.

[MommaB]

Ok I’m in love with the coloring on this strain what a beautiful plant. Well done

[ncrypta.core]

They certainly look to be liking the extra attention to detail. Thank you for such informative updates, I'm sure it will many over the years.

I sorta copied another grow log I saw I mean the presentation, The more info you have the better understanding you have, and easier to answer questions. Plus bonus if there people that like my end result that can see/copy how I did it.

Should really include my feeding schedule too, I am trying to think what other info I could add any ideas, how I did my par test for the lumatek ats 300 and spider farmer sf1000, sf1000 ppfd at 12in away is 398 after only a year


I'm planning to doing a crop steer diary for my third, need to put my learning glasses on first, as think it may confuse some as of this bit

you have 3 sections that you feed in. P1/P2/P3.

Example:
Your feeding 1-2% shot which is 1-2% of your pot size so mine would be 15l x 0.02= 300ml.

Flower stretch we will be “Generative” steering. Bigger dry downs overnight / P2.

STRETCH:
• 15-20% runoff
• P1 = 2% shots every 15 minutes until runoff is achieved on all plants, then 2 more of these 2% shots.
• P2 = dry back to 90% wet or dry back 5% water content, then 6% shots.
• P3 = dry back to 50% wet or dry back 25-30% water content.


Welcome to Crop Steering, Best learn this shit first and then do a thread on it first mind.

Ok I’m in love with the coloring on this strain what a beautiful plant. Well done

Thank you for your kind words. You just reminded me to ask the breeder if hotz will turn in colours as there's nothing on the web about her as the beeder said in one of my instagram comments

Yes it is rare! We didn't send out too many of those!.

[ncrypta.core]

UPDATE

Pre-feed Trizzler 2.25L of ph water with yucca. As the last feeding with her, she only had run off of 7.5%

Today she will be fed a total of 6.5L.

[ncrypta.core]

AD-45: July 8th 2021.
Feeding day for these two so thought I'd push them even harder had fed a 3.0ec including base ec of 0.5.

Tizzlers: Feed 6.75L @ 3.0EC
Hotz: Fed 4.5L @ 3.0 EC

WARNING - BEWARE
This is not recommended ONLY USE HIGH EC if your conditions are on point and your ladies are healthy, Otherwise, you can run the risk of issues and problems.

Air Control

* 82.4-86.4F (AVG-85.1F) (Lights On)
* 70F (Lights Off)
* 47%-57% (54.5% AVG) RH%
* LT: -3C
* VPD: 1.21 kPa

LT = Leaf Temp