First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post Reply
longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

after deciding that there was enough moisture in the medium after 2 days, I decided to water after 3 again.

this time I added 0.8m of Silicon with 4ltrs of water, plus the standard canna guide (choosing 12ml of boost out of the possible 10-14ml range)

plant took 5L with 15-20% runoff

also decided to chop off some of the lower branches that had started to flower but would never get enough light or catch up to the bigger flowering sites near the top of the canopy - so cut my loses, and took a risk, hoping that that the rest of the plant will benefit from the extra juice.- fingers crossed

still worried that it's too busy, what do you think?

Humidity struggles continue, but things are still going ok

I've moved the plant towards a corner so I can concentrate more light into that area, and also allows me to position the fan better (really annoyed with the small tent!)

have debated angling the light as one side seems one higher than the other, also, annoying some of the flowering sites in the centre are lower, though these are branches od main stems with big flowering sites), for now I've settled as per the pictures below

again, all advise, comments, etc welcome.

Hqppy Holidays
Maz

Image

Image

Image

Image

older pics with close ups

Image

Image
These users thanked the author longtimelover for the post (total 2):
camkush (Sun Dec 27, 2020 4:31 am) • Back Room Farmer (Sun Dec 27, 2020 12:08 pm)

Seed Stockers London Seed Centre The Cannabis Experts - You Tube Pheonix Seeds Invisible Sun LED Conscious gentics Barney's Farm Supernatural Seeds Tastebudz The Vault Cannabis Seed Store Philzon LED IZI Seeds IZI Seeds Tastebudz Breeders Colective Straightforward Genetics HY-GEN Nutrients Grow The Jungle Seed Stockers Dutch Passion Seed Company
User avatar
camkush
GR420 Moobs Of The Year
Posts: 4452
Joined: Tue Oct 31, 2017 4:56 pm
Location: Pluto
Has thanked: 2589 times
Been thanked: 3454 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by camkush »

First you have some beautiful plants with nice healthy colors. If you are referring to taking off the lower limbs you should be fine buddy. I prefer to do it before flower but as long as you dont go crazy and continue to constantly chop her in flower she will be fine!
These users thanked the author camkush for the post (total 2):
longtimelover (Sun Dec 27, 2020 8:31 am) • Guest (Sun Dec 27, 2020 9:08 am)
#5
Roll Tide :barmy:
#ProtectDiscord

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

camkush wrote:
Sun Dec 27, 2020 4:34 am
First you have some beautiful plants with nice healthy colors. If you are referring to taking off the lower limbs you should be fine buddy. I prefer to do it before flower but as long as you dont go crazy and continue to constantly chop her in flower she will be fine!
Thanks Camkush, this is my last chop... Need to hide the pruning scissors!

User avatar
Back Room Farmer
Registered User
Posts: 817
Joined: Sun Nov 29, 2020 8:12 am
Location: Philippines
Has thanked: 394 times
Been thanked: 500 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by Back Room Farmer »

Looking awesome!
These users thanked the author Back Room Farmer for the post:
longtimelover (Sun Dec 27, 2020 1:02 pm)

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

camkush wrote:
Sun Dec 27, 2020 4:34 am
First you have some beautiful plants with nice healthy colors. If you are referring to taking off the lower limbs you should be fine buddy. I prefer to do it before flower but as long as you dont go crazy and continue to constantly chop her in flower she will be fine!
also, this is just one plant

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

just completed week 3 of flowering, and the Plant is getting thirsty, very dry after 2 days! used around 4.5l with Canna guide and 0.3 CalMag boost - around 20% run-off - Note -this is 3.5L nutrient mix plus 1.L of water to lower the EC to 2 (as per Canna guide)

some bud sights getting closer together

wanted to utilise the TS600 light a bit better, so I'm positioned the plant closer to a corner and side. hopefully, this will concentrate the light on all the bud sites a bit better.

will see if there is anything negative or positive from this.

this is what the setup and plant look like now. Damn my small tent!

Image

Image

Image
These users thanked the author longtimelover for the post:
Guest (Tue Jan 12, 2021 1:15 pm)

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

I messed up on the lighting by unplugging it for a heater, losing 5 hrs of light. Reset things, so hopefully no negetuve effect.
Due to this (I think) the medium wasn't as dry after 2 days. So watering after 3 again.

Adding the heat a bit of defoliation and reorganising the of the layout has helped reduce the humidity to 45-47 which is a relief.

This is day 19 of flowering

Image

Image

Image

Image

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

onto the boring weeks 4-8

got to the stage that 4.5l of water after 3 days was not leaving any overflow, so now sticking to 2 days
mixing nutes for 4L and then only needing an extra 500ml to get the EC down to the recommended 2.0 for these weeks

noticed a few dry leaves in the share and removed them, and also spotted a few spots on leaves and one leaf with a little curl, see below.
didn't take any further action as it's 3 or 4 leaves out of a 100
Image
Image
Image
Image

the rest of the plant seems to be fine. lots of crystals on main branches and also the offshoots
disappointed with the lack of height, but maybe the number of flowering sites will make up for that
unfortunately with the net in place, it's really hard to see what's happening at the back.

today is the 37th day of flowering, according to the guide, i should now add PK boost to the mix for a week (3 or 4 feeds) - does it look ready?

Image

Image

Image

Image

Image

thanks for reading, please feel free to advise and comment

Maz
These users thanked the author longtimelover for the post:
Guest (Tue Jan 12, 2021 1:10 pm)

Guest
Registered User
Posts: 7654
Joined: Thu Jan 16, 2020 11:14 pm
Has thanked: 10686 times
Been thanked: 6785 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by Guest »

I've heard Keeno say he starts PK straight from flip, then mid flower flush and then stocks up on PK again. So from what I know yes.

I'd ask some more people from salt based ferts, GMO, Keeno.... shout at to them they'll soon help.
These users thanked the author Guest for the post:
longtimelover (Tue Jan 12, 2021 1:39 pm)
Treat people as if they were what they ought to be and you help them to become what they are capable of being.”

JOHANN WOLFGANG VON GOETHE

-----------------------------------------------------------------------------

"Insects and disease are the symptoms of a failing crop, not the cause of it. It's not the overpowering invader we must fear but the weakened condition of the victim."

William Albrecht

https://www.organacanna.co.uk/

longtimelover
Registered User
Posts: 136
Joined: Mon Oct 12, 2020 9:40 am
Has thanked: 111 times
Been thanked: 98 times
Status: Offline

Re: First Grow - Marshydro TS600 kit and Hulkberry Haze seed

Post by longtimelover »

DIY.Rik wrote:
Tue Jan 12, 2021 1:22 pm
I've heard Keeno say he starts PK straight from flip, then mid flower flush and then stocks up on PK again. So from what I know yes.

I'd ask some more people from salt based ferts, GMO, Keeno.... shout at to them they'll soon help.
@DIY.Rik thanks matey, according to Canna, there is already some PK in the A&B nutes so the additional is a boost, but I am interested in doing 2 rounds of boost before I get to flushing @Keeno any thoughts?

As per my last mchat with @Keeno i did end up doing a lot of defoliation - much more that I would have liked for week 5 of flowering,,

I managed to spread the buds out and found lots of under growth not getting enough light due to foliage, the leaves were very bright green.
this is before and after pics

before
Image

After
Image
Image


also found i need to water down a lot more to achieve 2.2 EC once I add the PK to the mix, seems kinda counter productive.

Post Reply

Return to “Completed Grow Diaries”