![Image](http://uploads.tapatalk-cdn.com/20200921/585d7a9667886c815df3f74c2191d4ab.jpg)
![Image](http://uploads.tapatalk-cdn.com/20200921/63230dbe03feb1e2e6999f465a77fe79.jpg)
![Image](http://uploads.tapatalk-cdn.com/20200921/50e03696315a3b717a2e690c0b91654a.jpg)
![Image](http://uploads.tapatalk-cdn.com/20200921/4593e00e4ad37c2d739dca8ecfde9dc5.jpg)
The QBs above are V1s, V2s and V3s. A mixture of LM561C, LM301B and LM301H diodes. 3000K + 4000K for white diodes. The supplement Red strips are Osram 660nm + 730nm. The UVA strips are 395nm Epistar diodes.
Each QB Board has around 800 to 864 pieces of diodes. They are each fitted with a 320W Meanwell driver but does not exceed 50% power. The objective of this setup is to drive the diodes very softly to reduce heat and possibly allow plants closer to light.
The UVA is turned on at 2 x 4 hour intervals.
So far, has been working well for me. Thanks for reading!