Tour of the Death Star & attack of the clones

[Vador]

Week 20 - Mother

Week 13 - Clones

A+B = 1.2 ml/L
Silicon = 0.5 ml/L
Rootstim = 0.8 ml/L
Fulvic = 0.8 ml/L

E.C = 1
P.H = 5.8
Bulb = 250w mh

I’ve just had to move my grow to a different room so been holding back putting these into flower, they are in there final resting place now though, the scrog net has been removed and mother is in with the clones, going to veg them till Sunday then flip, growing bushes, need to get in there and give them a bit of a trim too.


Made some lovely bho from some of my trim, filled the extraction tube twice with popcorn and still had loads left, smoked some with a friend the other day and it messed up both our days.
Next will do an oil run, just making an alcohol reclaim like duke taught us then I’ll get on with it.


Quite a good result


By next update should be rocking some new bling in there, stay tuned for exciting new upgrades.

[2-Scoops]

Next will do an oil run, just making an alcohol reclaim like duke taught us then I’ll get on with it.

You seen this mate https://www.ebay.co.uk/itm/154203993424 ... Swcbpft5yl theirs some great how too vids on YouTube

These still here look a fair price to if ya wanting to go the still route . https://www.ebay.co.uk/itm/313610689621 ... Sw-3dgcZck

BHO looks yummingtons brother plants coming on nicely too. Whats those green thingi-bobs for on top of your pots mate ?

[Vador]

Hey @2-Scoops thanks for the heads up, I’ve ordered all the bits I need to build one anyway just got to get my lazy arse in gear and put it all together

Those green things are part of a watering system I built, I seen keeno using this awesome hose pipe setup so copied the idea

There is a funnel connected to the top hose and I just pour my nutes in and it flows straight to the tops of the pots


That worked a treat but I wasn’t getting an even spread, the feed would pour out of the pipe and wash all the coco/ pebbles to one side and the coco wasn’t getting saturated enough.

So I designed this


It just slots around the stem of the plant and acts like a watering can rose, there’s a hole on the back for the hose pipe to go through, works perfect so far, early days still but the results have been promising so far, got 5 of them in action.
It also works well if your using slow release nutrient balls, mother plant has got a load of balls in the tray and all she’s had for the last month or so is slow release nutes and ph’d water, gonna flip her soon so all I need to do is hoover out the feed balls from the tray and carry on feeding her with flowering nutes.

Yeah that shatter has been lovely so far, 15g of the stuff I got in the end, gonna last a long time

[2-Scoops]

Need to make some hash mate myself, fucking freezer is full of decent crap from bud bowl trimmer, man their must be 5 bags but yes im a lazy git too.

See what you mean with those thingi-bobs, great idea .

[Guest]

Hey @2-Scoops thanks for the heads up, I’ve ordered all the bits I need to build one anyway just got to get my lazy arse in gear and put it all together

Those green things are part of a watering system I built, I seen keeno using this awesome hose pipe setup so copied the idea

There is a funnel connected to the top hose and I just pour my nutes in and it flows straight to the tops of the pots


That worked a treat but I wasn’t getting an even spread, the feed would pour out of the pipe and wash all the coco/ pebbles to one side and the coco wasn’t getting saturated enough.

So I designed this


It just slots around the stem of the plant and acts like a watering can rose, there’s a hole on the back for the hose pipe to go through, works perfect so far, early days still but the results have been promising so far, got 5 of them in action.
It also works well if your using slow release nutrient balls, mother plant has got a load of balls in the tray and all she’s had for the last month or so is slow release nutes and ph’d water, gonna flip her soon so all I need to do is hoover out the feed balls from the tray and carry on feeding her with flowering nutes.

Yeah that shatter has been lovely so far, 15g of the stuff I got in the end, gonna last a long time

Patent the idea, get @Keeno on it???

[Vador]

Need to make some hash mate myself, fucking freezer is full of decent crap from bud bowl trimmer, man their must be 5 bags but yes im a lazy git too.

See what you mean with those thingi-bobs, great idea .

Yeah I think I’ll do a hash run soon, got an idea for a sifting machine I want to try out, need to get some bits ordered and then get on the case and build something

Patent the idea, get @Keeno on it???

Not a bad idea that

[2-Scoops]

Yeah I think I’ll do a hash run soon, got an idea for a sifting machine I want to try out, need to get some bits ordered and then get on the case and build something

Do us a full how too in here mukka, im interested. Cheers.

[Vador]

Yeah I think I’ll do a hash run soon, got an idea for a sifting machine I want to try out, need to get some bits ordered and then get on the case and build something

Do us a full how too in here mukka, im interested. Cheers.

Yeah no problem, it will involve some 3d printed parts so maybe not for everyone but the 3d printed parts could probably be replaced by something else I guess, maybe wood

[duke]

hi vador its looking hitech in here!nice dripper system very clever,glad to hear someone else building the condenser,best diy money saver ever for me!hash making used to be my hobby i had diy silk screen with dc motor and flywheel unbalanced as a shaker,boy it could shake! maybe i should have bolted it down,,,,,,

[Vador]

Thanks @duke, I was inspired by your condenser build and very appreciative of the links you shared, made sourcing the parts a whole lot easier so thanks for that.
Going to build mine in a 20L barrel and use cool packs to fill it, I’ve formed the coil and got a plan for the build. only just got a barrel emptied so gonna clean it up and fit it out over the next couple of days.
My next wash should use about 10L of iso in total so will be glad to reclaim some of that.

What I was thinking for the hash machine was making a drum of mesh with 3d printed end caps, one end has a door that opens up for filling and there’s a centre hole for a metal spindle, some sort of belt system with a motor turning it nice and slowly. Then just need a 3d printed stand to hold the drum and a collection tray maybe a mirror or sheet of glass.
Haven’t decided the ins and outs of it just yet but something along those lines.