This is just a quick thread to highlight that we don't just sell kits ready to go, our ISH120 60w DIY boards are a great option if you are looking to build a DIY set up.
The boards are 24v volt and have a max current of 2100mA, they ,measure 240mmx240mm and are available in 3000k 3500k and 4000k.
For Example
4 x boards could be ran very nicely on either a HLG 240H 24A/B in parallel or HLG 240H c2100A/B for series. You could run 8 boards with a HLG 480H c2100A/B
By the measurements of the boards and depending on the configuration you could fit either 8-9 in a 4x4 very nicely, the canopy coverage would be insane with par potentially in the 800's + in the corners.
a 480w system for a 4x4 which included 8 boards and driver would roughly come in at around £340 - £370 quid depending on the driver and frame used, this is far less than 2 x 250w kits for a 4x4 and with a very similar output but with an unmeasurable improvement in the coverage of the canopy.
Iv ordered some aluminum to get some frames done as a tester,ill post on here so that people can see how easy it is and most importantly the results.
If anyone has any questions, or needs help with any ideas for a set up please feel free to hit us up,
GR420 Radio
Links
