Image

Invisible Sun feed

King of the indoor jungle
Post Reply
User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

Tictok wrote:
Tue Jan 17, 2023 3:13 pm
Invisible Sun wrote:
Sun Jan 15, 2023 12:37 pm
wutang wrote:
Sun Jan 15, 2023 12:32 pm


Can these be used for seedlings/propagation to replace t5 lights? Will you have them in small sizes at somepoint?

Thanks
Yes that's exactly what they are for. Replacing T5.

And yes we do them in 80cm or 40cm options.
40cm is very interesting. Could you give any details how these could be better than T5s?
https://invisiblesunled.co.uk/products/ ... s=e&_v=1.0

Here is the link to the listing. Generally though benefits over T5 are as follows

Reduced electric costs.
Longevity.
No bulb Changes.
Better spectrum.
IP64 so protected from spilling, splashes or spray.
Can be used as side or under lighting.
Can be used as fish tank lights.
These users thanked the author Invisible Sun for the post:
Tictok (Wed Jan 18, 2023 12:54 pm)
For further information on our products please visit our website www.invisiblesunled.co.uk

User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

Image

ISH150 e line.

User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

Image
These users thanked the author Invisible Sun for the post (total 2):
Tictok (Mon Jan 23, 2023 11:51 am) • biosynthetic (Mon Jan 23, 2023 2:25 pm)

User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

Image
One of the older ISH530 V2 before we put connector an wire covers on them. This was lm301h with V2 reds & royal Blue.

You get better penetration (for want of a better word) of light through the canopy with boards over bar style systems, which need to be positioned closer
These users thanked the author Invisible Sun for the post (total 3):
biosynthetic (Wed Jan 25, 2023 2:59 pm) • Tictok (Wed Jan 25, 2023 5:01 pm) • Greenfingers (Sat Jan 28, 2023 10:52 pm)

User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

Image

User avatar
wutang
Known User
Posts: 3167
Joined: Tue Aug 25, 2020 11:24 am
Has thanked: 2010 times
Been thanked: 1890 times
Status: Offline

Re: Invisible Sun feed

Post by wutang »

Invisible Sun wrote:
Wed Jan 25, 2023 1:21 pm
Image
One of the older ISH530 V2 before we put connector an wire covers on them. This was lm301h with V2 reds & royal Blue.

You get better penetration (for want of a better word) of light through the canopy with boards over bar style systems, which need to be positioned closer
I think this is the same one I've got...or similar.. mines a 530LITE.. what's the key differences between this and the one in this post? Cheers Invis

User avatar
Invisible Sun
Posts: 744
Joined: Fri Jul 20, 2018 12:19 am
Has thanked: 332 times
Been thanked: 967 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Invisible Sun »

wutang wrote:
Sat Jan 28, 2023 10:19 pm
Invisible Sun wrote:
Wed Jan 25, 2023 1:21 pm
Image
One of the older ISH530 V2 before we put connector an wire covers on them. This was lm301h with V2 reds & royal Blue.

You get better penetration (for want of a better word) of light through the canopy with boards over bar style systems, which need to be positioned closer
I think this is the same one I've got...or similar.. mines a 530LITE.. what's the key differences between this and the one in this post? Cheers Invis
Only the heat sink and drivers are different. Same LEDs and boards.
These users thanked the author Invisible Sun for the post:
wutang (Mon Jan 30, 2023 8:05 am)

User avatar
biosynthetic
Known User
Posts: 2237
Joined: Tue Jun 22, 2021 3:23 pm
Has thanked: 4127 times
Been thanked: 1457 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by biosynthetic »

Yo 8-) quick question - What cables would I need to use 3 lights linked to the master controller (for daisy chaining) and is this driver (xbar prototype) compatible?
Image

User avatar
Vador
Known User
Posts: 2599
Joined: Thu Sep 30, 2021 10:47 pm
Has thanked: 1042 times
Been thanked: 1432 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Vador »

biosynthetic wrote:
Wed Feb 15, 2023 3:40 pm
Yo 8-) quick question - What cables would I need to use 3 lights linked to the master controller (for daisy chaining) and is this driver (xbar prototype) compatible?
Image
There are two types of cable so you have to be a little careful, i think the daisy chain cable is rj14 to rj14.
The smart controller cable is a little different and has a different pinout to the standard rj14 cable.
Smart controller comes with the cables to go two separate lights, then use the rj14 to daisychain your other lights.
Hope that makes sense
These users thanked the author Vador for the post (total 2):
biosynthetic (Thu Feb 16, 2023 8:21 pm) • Tictok (Fri Feb 17, 2023 12:29 am)
░█▒█▒▄▀▄░█▀▄░▄▀▄▒█▀▄
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄


Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.

User avatar
Vador
Known User
Posts: 2599
Joined: Thu Sep 30, 2021 10:47 pm
Has thanked: 1042 times
Been thanked: 1432 times
Contact:
Status: Offline

Re: Invisible Sun feed

Post by Vador »

These users thanked the author Vador for the post (total 2):
biosynthetic (Thu Feb 16, 2023 8:24 pm) • Tictok (Fri Feb 17, 2023 12:29 am)

Post Reply

Return to “Invisible Sun LED”