Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.

Possible calcium or magnesium issue

Get help fixing cannabis deficiencies and issues
Post Reply
grownnotflown420
Registered User
Posts: 224
Joined: Mon Nov 30, 2020 12:20 pm
Has thanked: 111 times
Been thanked: 152 times
Status: Offline

Possible calcium or magnesium issue

Post by grownnotflown420 »

Afternoon all,

Hope you are all well!

Please could I have some assistance, my babies are on week 4 or 5 of veg, grown from clones, but in the past week or so I am seeing rusting on the leaves, general yellowing between vains and some curled leaves which make me believe I have a cal or mag issue. Some pics are below

Setup:
ISH F bar running at 50%
Canna coco a and b, rhizoctonic and cannazyme as per their grow guide calculator on their website, ppm ends up around 850-900ppm and is just short of 200ppm fresh from the tap
Ecothrive coco pro
Dynomyco
15L pots
pH 6.0
RH fairly stable at approx 70%
Day temps about 23 until my heater comes
Night temps about 19

Pics:
Image
Image
Image
Image

Any help appreciated!!!
--------GrownNotFlown--------

--------Bloody Skunk Auto DWC--------

Marcus
GR420 Leg End
Posts: 5241
Joined: Thu Nov 29, 2018 2:25 pm
Has thanked: 2463 times
Been thanked: 4662 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by Marcus »

Looks like you've burnt the shit out of it.

How many ml per L of the A+B are you using?

I'd have them around 1.5 or 2ml / L for that size.

No need for the rhizo or cannazyme snake oils.

User avatar
JJ
New Years Grow Off Winner
Posts: 7322
Joined: Sat Aug 22, 2020 6:39 pm
Location: Usa ohio
Has thanked: 153 times
Been thanked: 4970 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by JJ »


User avatar
JJ
New Years Grow Off Winner
Posts: 7322
Joined: Sat Aug 22, 2020 6:39 pm
Location: Usa ohio
Has thanked: 153 times
Been thanked: 4970 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by JJ »


grownnotflown420
Registered User
Posts: 224
Joined: Mon Nov 30, 2020 12:20 pm
Has thanked: 111 times
Been thanked: 152 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by grownnotflown420 »

Marcus wrote:
Thu Oct 06, 2022 11:05 am
Looks like you've burnt the shit out of it.

How many ml per L of the A+B are you using?

I'd have them around 1.5 or 2ml / L for that size.

No need for the rhizo or cannazyme snake oils.
What makes you say burn over cal or mag dude? 900ppm doesn’t necessarily seem high too me?

Canna’s grow guide works out about 2ml per litre maybe a touch over

Also, my question wasn’t around whether I need rhizome or cannazyme, in the nicest way possible haha… they’re cheap so i don’t mind

User avatar
GMO
GR420 Leg End
Posts: 10529
Joined: Sat Jun 02, 2018 2:44 pm
Has thanked: 5717 times
Been thanked: 3805 times
Contact:
Status: Offline

Re: Possible calcium or magnesium issue

Post by GMO »

looks like over watering combined with too much light for the growth stage

900 ppm is roughly 1.8 EC which i think most here would agree is fairly high for the growth stage

Id say reduce everything except temps and get some airflow over the pots to help em dry out
“If you can't explain it to a six year old, you don't understand it yourself.” -Albert Einstein

Marcus
GR420 Leg End
Posts: 5241
Joined: Thu Nov 29, 2018 2:25 pm
Has thanked: 2463 times
Been thanked: 4662 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by Marcus »

grownnotflown420 wrote:
Thu Oct 06, 2022 7:31 pm
Marcus wrote:
Thu Oct 06, 2022 11:05 am
Looks like you've burnt the shit out of it.

How many ml per L of the A+B are you using?

I'd have them around 1.5 or 2ml / L for that size.

No need for the rhizo or cannazyme snake oils.
What makes you say burn over cal or mag dude? 900ppm doesn’t necessarily seem high too me?

Canna’s grow guide works out about 2ml per litre maybe a touch over

Also, my question wasn’t around whether I need rhizome or cannazyme, in the nicest way possible haha… they’re cheap so i don’t mind
Sorry dude, I was implying to sort them out, drop the rhizo and cannazyme and just give them a lighter feed of plain A+B.

As GMO says, 1.8 EC is quite high for those. I;d have it around 1 or 1.2 EC.

They look like they've had a load of stuff lopped off them too. It really looks like they've been over fed to me, they'll come round with a few light feeds.

grownnotflown420
Registered User
Posts: 224
Joined: Mon Nov 30, 2020 12:20 pm
Has thanked: 111 times
Been thanked: 152 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by grownnotflown420 »

Marcus wrote:
Thu Oct 06, 2022 8:19 pm
grownnotflown420 wrote:
Thu Oct 06, 2022 7:31 pm
Marcus wrote:
Thu Oct 06, 2022 11:05 am
Looks like you've burnt the shit out of it.

How many ml per L of the A+B are you using?

I'd have them around 1.5 or 2ml / L for that size.

No need for the rhizo or cannazyme snake oils.
What makes you say burn over cal or mag dude? 900ppm doesn’t necessarily seem high too me?

Canna’s grow guide works out about 2ml per litre maybe a touch over

Also, my question wasn’t around whether I need rhizome or cannazyme, in the nicest way possible haha… they’re cheap so i don’t mind
Sorry dude, I was implying to sort them out, drop the rhizo and cannazyme and just give them a lighter feed of plain A+B.

As GMO says, 1.8 EC is quite high for those. I;d have it around 1 or 1.2 EC.

They look like they've had a load of stuff lopped off them too. It really looks like they've been over fed to me, they'll come round with a few light feeds.
Thank you sir, really appreciate the assistance, I’ll give your recommendations a go and report back in a week or so

grownnotflown420
Registered User
Posts: 224
Joined: Mon Nov 30, 2020 12:20 pm
Has thanked: 111 times
Been thanked: 152 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by grownnotflown420 »

GMO wrote:
Thu Oct 06, 2022 8:10 pm
looks like over watering combined with too much light for the growth stage

900 ppm is roughly 1.8 EC which i think most here would agree is fairly high for the growth stage

Id say reduce everything except temps and get some airflow over the pots to help em dry out
Thank you bro really appreciated, what would recommend in terms of calmag? 0.5ml/L or drop it completely?

Marcus
GR420 Leg End
Posts: 5241
Joined: Thu Nov 29, 2018 2:25 pm
Has thanked: 2463 times
Been thanked: 4662 times
Status: Offline

Re: Possible calcium or magnesium issue

Post by Marcus »

grownnotflown420 wrote:
Fri Oct 07, 2022 12:25 am
GMO wrote:
Thu Oct 06, 2022 8:10 pm
looks like over watering combined with too much light for the growth stage

900 ppm is roughly 1.8 EC which i think most here would agree is fairly high for the growth stage

Id say reduce everything except temps and get some airflow over the pots to help em dry out
Thank you bro really appreciated, what would recommend in terms of calmag? 0.5ml/L or drop it completely?
Have a look at the back of your A+B bottles for the ingredients... It's full of calcium and magnesium already.

There is no need to add any more.

ImageImage

Post Reply

Return to “Cannabis issues and help section”