Reblasting contaminated hash oil

Make your own hashish, hash, resin & solid
Post Reply
User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Reblasting contaminated hash oil

Post by Josh »

Hey everyone!

So long story short was doing a bho run the other night, spraying into my pyrex. Of course on my last tube of the night I got greedy and over-packed it
Blew the rubber stopper right off the back and rained weed into about 10 grams of hash oil
YAYYYY

Anywho, still have more material to run this weekend so my question is:
Can I put my chunk of bho back in the blast tube with some trim and redissolve it?? Or should I break it up into a bunch of pieces and try and dissolve it in multiple runs?

Hopefully someone has experienced this exact situation and can help me out.
Thanks in advance!

Happy growing

Sent from my LGMP260 using Tapatalk


User avatar
Wizard
Respected Member
Posts: 5904
Joined: Thu Jun 14, 2018 10:43 pm
Location: Canada Eh
Has thanked: 1208 times
Been thanked: 1504 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Wizard »

id think your best bet would be disolve it with iso , remove contam and cook off the iso ,
We can get swept away by our thoughts,,or learn to step back and see them with clarity.
Easy to forget its a choice

User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

Wizardsbrew wrote:id think your best bet would be disolve it with iso , remove contam and cook off the iso ,
That's what I was thinking. Think I could dissolve, run through a coffee filter into the pyrex and then continue spraying my other trim with butane right on top? Like dissolve it all at once
Hopefully that makes sense

Sent from my LGMP260 using Tapatalk


User avatar
Wizard
Respected Member
Posts: 5904
Joined: Thu Jun 14, 2018 10:43 pm
Location: Canada Eh
Has thanked: 1208 times
Been thanked: 1504 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Wizard »

Coffee filter yes , I’d keep the iso separate from the bho as iso takes a lot longer to cook off , I’ve never mixed the two so really not sure what results you would get from it


Sent from my iPhone using Tapatalk

User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

Wizardsbrew wrote:Coffee filter yes , I’d keep the iso separate from the bho as iso takes a lot longer to cook off , I’ve never mixed the two so really not sure what results you would get from it


Sent from my iPhone using Tapatalk
Thanks for the help wiz I'll buy a small Pyrex just for the ISO

Sent from my LGMP260 using Tapatalk


User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

Took about an hour of mixing in a glass until the hash finally dissolved again! Ffs, almost cramped my wrist up and yes that's my blender hopefully my gf doesn't find out

Letting it air purge with a fan/screen over it outside, I'll let you guys know how it smokes in a couple days! Thanks again for the help wiz

Sent from my LGMP260 using Tapatalk



User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

I think dissolving the hash back in iso worked good, but it sat in the iso way too long. After drying a couple days it came out way darker than the batch ran butane. Still happy with the end product though

Sent from my LGMP260 using Tapatalk


User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

Welp, not smoking that shit anymore. Took a huge dab and got the worst heartburn of my life for about 2 hours. I'm about 99% sure that there's a shitload of alcohol still in the oil somehow

It was air purged for 3 days.
Is there anyway I can make sure it's completely free of alcohol without a vac chamber?

Sent from my LGMP260 using Tapatalk


User avatar
Wizard
Respected Member
Posts: 5904
Joined: Thu Jun 14, 2018 10:43 pm
Location: Canada Eh
Has thanked: 1208 times
Been thanked: 1504 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Wizard »

integrajosh wrote:Welp, not smoking that shit anymore. Took a huge dab and got the worst heartburn of my life for about 2 hours. I'm about 99% sure that there's a shitload of alcohol still in the oil somehow

It was air purged for 3 days.
Is there anyway I can make sure it's completely free of alcohol without a vac chamber?

Sent from my LGMP260 using Tapatalk
I’ve always done a hot water bath to purge the iso out


Sent from my iPhone using Tapatalk

User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 2457 times
Been thanked: 1374 times
Contact:
Status: Offline

Re: Reblasting contaminated hash oil

Post by Josh »

Wizardsbrew wrote:
integrajosh wrote:Welp, not smoking that shit anymore. Took a huge dab and got the worst heartburn of my life for about 2 hours. I'm about 99% sure that there's a shitload of alcohol still in the oil somehow

It was air purged for 3 days.
Is there anyway I can make sure it's completely free of alcohol without a vac chamber?

Sent from my LGMP260 using Tapatalk
I’ve always done a hot water bath to purge the iso out


Sent from my iPhone using Tapatalk
I'll try this again

Sent from my LGMP260 using Tapatalk


Post Reply

Return to “Hashish/Hash Room”