Welcome to the cannabis growing section. Discuss and share knowledge about growing cannabis. To become part of our online cannabis growing community click here to register.

Bits I need

Knowledge base and discussions for growing cannabis
Post Reply
User avatar
IMO
Known User
Posts: 2893
Joined: Mon Apr 27, 2020 8:01 am
Location: Northwest Uk
Has thanked: 2241 times
Been thanked: 2821 times
Status: Offline

Bits I need

Post by IMO »

Hi Guys
Getting my bits together for my first indoor grow

So far got
1.2x1.2x2m tent
120w dual spectrum cfl for seedlings
Led grow light says its replacement for 600w hps but draws 250w from socket so I doubt it but still seems ok
6inch Rvk fan with rhino pro filter
Dimmer for fan
Canna coco pro
Canna a&b
Canna pk 13/14
Great white powder
Temp humidity meter
Ph tester

On order is a 4x11L Wilma kit
I’m going to order some eco thrive amendment seems to come recommended
Is there anything else I may need ie calmag and ph up & down?

Cheers
These users thanked the author IMO for the post:
The Aspie Toker (Mon May 04, 2020 10:24 pm)

London Seed Centre   The Cannabis Experts - You Tube
User avatar
Minty
Respected Member
Posts: 3963
Joined: Sat Apr 18, 2020 7:21 pm
Has thanked: 5673 times
Been thanked: 2162 times
Status: Offline

Re: Bits I need

Post by Minty »

Assuming your fan is for Extract, what do you have in means of fresh intake of air?

Couple of things:-

* Nets / String for managing the grow
* Something to measure Nutrients with (scales, etc)
* Buckets and shit for mixing in

Sure there is more, and not sure what requirements you have in terms of automating the grow like timers for your lights etc.

Might also we worth getting a few spares for your Wilma up front so you can be prepared ;o)
Last edited by Minty on Mon May 04, 2020 9:16 pm, edited 1 time in total.

User avatar
Captain Beefheart
GR420 Leg End
Posts: 7580
Joined: Sat Nov 04, 2017 3:05 pm
Location: on a wet rock in the north sea
Has thanked: 2664 times
Been thanked: 4461 times
Contact:
Status: Offline

Re: Bits I need

Post by Captain Beefheart »

a few dope plants now + a bottle of bourbon + your good to boot. :oik!: good luck. :Stoned:
These users thanked the author Captain Beefheart for the post (total 2):
Minty (Mon May 04, 2020 9:17 pm) • IMO (Mon May 04, 2020 9:25 pm)

User avatar
IMO
Known User
Posts: 2893
Joined: Mon Apr 27, 2020 8:01 am
Location: Northwest Uk
Has thanked: 2241 times
Been thanked: 2821 times
Status: Offline

Re: Bits I need

Post by IMO »

Thanks for the reply minty, I assumed that the air would be drawn in through on of the lower vents?
Got syringes and jugs for measuring nutes, will get a few buckets, will look into the nets have all manner of strings
These users thanked the author IMO for the post:
Minty (Mon May 04, 2020 9:52 pm)

User avatar
GMO
GR420 Leg End
Posts: 10526
Joined: Sat Jun 02, 2018 2:44 pm
Has thanked: 5706 times
Been thanked: 3795 times
Contact:
Status: Offline

Re: Bits I need

Post by GMO »

Yeah, PH down is a good idea.

i doubt youll need the ecothrive stuff tbh. calmag wont be a back idea to have on hand.

the 250w will probably be under powered for finishing flower in 1.2x 1.2. it could be worth looking at doubling that up 8-)

also the mixing buckets are a good shout as well as an EC meter
These users thanked the author GMO for the post:
IMO (Mon May 04, 2020 9:44 pm)
“If you can't explain it to a six year old, you don't understand it yourself.” -Albert Einstein

User avatar
IMO
Known User
Posts: 2893
Joined: Mon Apr 27, 2020 8:01 am
Location: Northwest Uk
Has thanked: 2241 times
Been thanked: 2821 times
Status: Offline

Re: Bits I need

Post by IMO »

😂 yeah the seeds need to be ordered for sure 👍
These users thanked the author IMO for the post:
GMO (Mon May 04, 2020 9:26 pm)

User avatar
IMO
Known User
Posts: 2893
Joined: Mon Apr 27, 2020 8:01 am
Location: Northwest Uk
Has thanked: 2241 times
Been thanked: 2821 times
Status: Offline

Re: Bits I need

Post by IMO »

GMO wrote:
Mon May 04, 2020 9:26 pm

the 250w will probably be under powered for finishing flower in 1.2x 1.2. it could be worth looking at doubling that up 8-)
For my first indoor I was thinking of only running 2 plants in the Wilma so do you think the 250w would be enough for that?, also I could run the 120w dual spectrum cfl along side the led for extra light?, moving forward an invisible sun is on the cards.
These users thanked the author IMO for the post:
GMO (Mon May 04, 2020 11:12 pm)

User avatar
Minty
Respected Member
Posts: 3963
Joined: Sat Apr 18, 2020 7:21 pm
Has thanked: 5673 times
Been thanked: 2162 times
Status: Offline

Re: Bits I need

Post by Minty »

IMO wrote:
Mon May 04, 2020 9:25 pm
I assumed that the air would be drawn in through on of the lower vents?
Keeno did a good post about fans i.e. intake vs extract etc and loads of other useful information. Will see if I can find it again.
IMO wrote:
Mon May 04, 2020 9:47 pm
moving forward an invisible sun is on the cards
These Rock
These users thanked the author Minty for the post:
IMO (Mon May 04, 2020 11:14 pm)

User avatar
Minty
Respected Member
Posts: 3963
Joined: Sat Apr 18, 2020 7:21 pm
Has thanked: 5673 times
Been thanked: 2162 times
Status: Offline

Re: Bits I need

Post by Minty »

Minty wrote:
Mon May 04, 2020 9:57 pm
Keeno did a good post about fans i.e. intake vs extract etc and loads of other useful information.
Found it. Here it is, well worth a read mate.

Keeno is good at explaining shit in an easy to digest manner.
These users thanked the author Minty for the post:
IMO (Mon May 04, 2020 10:51 pm)

User avatar
The Aspie Toker
GR420 Leg End
Posts: 14748
Joined: Tue Oct 24, 2017 7:45 pm
Location: Your mother's bedroom.
Has thanked: 8894 times
Been thanked: 5065 times
Status: Offline

Re: Bits I need

Post by The Aspie Toker »

IMO wrote:
Mon May 04, 2020 8:42 pm
Hi Guys
Getting my bits together for my first indoor grow

So far got
1.2x1.2x2m tent
120w dual spectrum cfl for seedlings
Led grow light says its replacement for 600w hps but draws 250w from socket so I doubt it but still seems ok
6inch Rvk fan with rhino pro filter
Dimmer for fan
Canna coco pro
Canna a&b
Canna pk 13/14
Great white powder
Temp humidity meter
Ph tester

On order is a 4x11L Wilma kit
I’m going to order some eco thrive amendment seems to come recommended
Is there anything else I may need ie calmag and ph up & down?

Cheers
Protect your eyes and grab yourself some UV glasses.

Image

Get yourself a variac rather than a dimmer. More expensive, but will work out cheaper in the long run.
These users thanked the author The Aspie Toker for the post (total 2):
Minty (Tue May 05, 2020 12:50 am) • IMO (Tue May 05, 2020 6:11 pm)
Never give advice. Wise men don't need advice. Fools won't take it.

Post Reply

Return to “Cannabis Growing”