Invisible Sun LED - The Clone Wars Competition

[Jayme Ream]

To celebrate the launch of our new Clone & Rooting Bars, we are holding a competition for growroom420 members .

The Clone Wars


We will be giving away a bunch of double packs of our Clone & Rooting Bars to the best entries.

To enter you need to post a step by step guide to how you root clones, this is your personal guide so make it individual to yourself.

Included in this guide you must include

• Each step you take from cutting the clones off your mothers through to rooting and then propagation.

• We require you to list the equipment you use, from rooting agents to medium to lights and propagators or bubblers.

• We require a you to list what techniques work for you, any tricks of the trade that give you good results or speed up the process

• Minimum of 3 photos should be included but feel free to include more, you must include a photo of your full cloning set up

We will pick the best guides at the end of January and reward the winners with a double pack of 2 x 10w (40cm) Clone Bar's worth £84.95
We will be rewarding 2 winners for every 10 entries, so if 10 people enter there will be 2 winners, if 100 people enter there will be 20 winners.

This competition is held by Invisible Sun LED and not the forum, so this means the competition is open to all members of the forum, including admin and mods.

No post count required to enter.

The Prize - https://invisiblesunled.co.uk/products/ ... ooting-bar

• Perfect for Rooting clones and seedling growth

• Growing herbs & mushrooms

• Low wattage at 10w or 20w

• 5000k spectrum to initiate root & vegetative growth

• Clear diffuser to protect LED

• Powered by 24v DC power supply

• CE, UKCA, ROHS, IP64

The Invisible Sun LED Clone & Rooting Bar is the perfect system to root and establish clones, grow seeds, herbs and even mushrooms.

Powered by 5000k Samsung LED the Clone & Rooting Bars have the perfect spectrum to initiate root and vegetive growth.

The Clone & Root Bars are available in 10w and 20w variants, and available in single bar or double bar packs.

Single and double bar packs are easily powered by a single DC power supply which can power 2 bars at a time.

10w Clone & Rooting Bar is 400mm in length and has a clear diffuser to protect LED

20w Clone & Rooting Bar is 800mm in length and has a clear diffuser to protect LED

Each pack is supplied with the following

Clone & Rooting Bar/ Bars
DC power supply
Hanging eyelets
Cable ties
Double packs include splitter cable
Dimensions

10w bar - 24mm * 22mm * 400mm

20w bar - 24mm * 22mm * 800mm

Lamp Efficiency

2 umol/j

Recommended Hanging Distance

6-10 inches

[Jayme Ream]

So sweet! Right in time! Good luck ya’ll cheers

[Jayme Ream]

Very cool @Invisible Sun. Ill have a crack at this one.

[Jayme Ream]

Need to find pictures then can do a write up

[chillbert42]

Equipment used:
Rockwool cubes
Athena Pro
Athena Cleanse
Clonex (soon be Cutz)
T5
Humidifier
Smart temp/humidity controller
Smart plug
Heated propagator

Step 1

Clean scissors with flash bleach then dipped in Athena cleanse solution and then wiped with 70% alcohol left to dry

Step 2

Mix up 3ml/L core and 4.9ml bloom to = 2.1Ec aswell

Step 3
Once scissors are dry go to the mother plant and take off cutting that have at least 2 nodes and drip thrm in the cleanse solution to clean them.

Step 4

Take the Rockwool cubes and place them into the 2.1Ec mix

Step 5

Take a cutting and chop at 45 degree then slice a layer off to expose more surface area then place into a shot glass with clonex or Athena cutz for 30secs or more, then take the cube and shake it like your having a slow wank but DO NOT Squeeze then place cuttings into it

Step 6

Place cube in propagator and pour in a little of the mix and splash the dome

Leave in propagator for 2-3days before checking on them the feed 2.1Ec mix again on day 4 then day 8-9 then every 2 days of as required

Between day 4 - 14 have the domes off to get used to what the veg side will be like for rh. Vpd aim 0.6-0.9

The humidity is controlled my the smart plug and also use a small usb fan to blow over while to dome is off

Step 7
Once’s rooted change feed to 3ec if running them or just stick to 2.1 if mothers



The new mothers




Please be swear The humidifier and controller been move to the next stage tent as about to move them all if need any other pics let me know

I’ve had 100% clone success rate using this method

[Jayme Ream]

So sweet! Right in time! Good luck ya’ll cheers

We look forward to seeing your entry

[Jayme Ream]

And yours @Keeno

[Jayme Ream]

And yours @Keeno

It will be hard to get pics of mine, as soon as I take a clone it goes into flower and starts to harvest itself... Have to be real quick with the camera

[Jayme Ream]

Oh wow how cool is this!! My tents full so no room for clones currently but this is great! Thank ya

[Jayme Ream]

And yours @Keeno

It will be hard to get pics of mine, as soon as I take a clone it goes into flower and starts to harvest itself... Have to be real quick with the camera

I think you have a tiny 6 month window don't you